Showing posts with label Radio. Show all posts
Showing posts with label Radio. Show all posts
Wednesday, 13 May 2015

Overdriving the rigs ALC and producing spatter

›
On data modes it is very easy to overdrive the rig audio input causing the rigs ALC circuit to kick in. The result of this is to cause spatt...
Wednesday, 6 May 2015

Wouxun KG-UV950P review - Part 8 - The volume controls

›
Dual concentric volume controls are on the right hand side of the control panel The volume controls, as there are two of them on the K...
Monday, 16 March 2015

Wouxun KG-UV950P review - Part 7 - Out of band transmission WARNING

›
Out of the box this rig is capable of transmitting out of band, assuming you have a resonant antenna, which I found odd especially as it w...

Wouxun KG-UV950P review - Part 5 - Scan settings

›
The rig is capable of scanning the VFO or any memories you may have programmed in. As a default SCAN A (VFO A) and SCAN B (VFO B) are...
1 comment:

Wouxun KG-UV950P review - Part 4 - FM Broadcast settings

›
Wouxun KG-UV950P transceiver. Once again when running the KG-UV905P 2.5K programming software if you click the FM Broadcast Memories tab...
Friday, 13 March 2015

Wouxun KG-UV950P review - Part 3 - Configuration and VFO Programming

›
Maybe I should have had this section first as it is very important other wise everything defaults to Chinese. Configuration Tab Whils...

Wouxun KG-UV950P review - Part 2 - Memory Programming

›
Cable connection The programming cable has a USB connector at one end and an RJ45 plug at the other. Plugging into the rig involves remov...

Wouxun KG-UV950P review - Part 1

›
The Wouxun KG-UV950P has been part of the radio shack since around November 2014. In that time I have been pleasantly surprised by it. T...